Diamond Gel nr3 15ml
13,99 €
BUILDER GEL is a
modeling gel used for nail
extension, restoration, and
strengthening.
• Acid-free
• Provides cushioning and does not
crack upon impact
• Medium consistency (not too runny
or too thick)
• Medium pigmentation, covers the
free edge
• Suitable for the «no-filing» technique
• Suitable for extension using «upper
forms»
• Doesn’t cause burning in the lamp
• Becomes thicker in cold
temperatures, thinner in warm
temperatures
• Thixotropic - becomes thinner during
application with brush movements
• Can be additionally heated to make
the gel thinner
• Hardens to a thickness of 1 mm; if the
thickness is less than 1 mm, it may
flex slightly, but this does not affect
wearability
• Doesn’t shrink and holds the arch
well
• Requires an underlay of Rubber base
LUNAmoon
Kiekis
Sandėlyje liko tik 1
🚚 Pristatymo informacija
🔹 Pristatymas Lietuvoje:
Užsakymai išsiunčiami per 1–2 darbo dienas po apmokėjimo.
Pristatymas vykdomas per Omniva, DPD arba LP Express (paštomatai arba kurjeris).
Pristatymo terminas: 1–3 darbo dienos.
🔹 Pristatymo kaina:
-
Nuo 3.00 € (tiksli kaina apskaičiuojama užsakymo pateikimo metu)
-
Nemokamas pristatymas Lietuvoje, jei užsakymo suma viršija 50 €
🔹 Siuntos sekimas:
Po išsiuntimo gausite sekimo numerį, kad galėtumėte stebėti siuntos kelią.
💅Application method:
STRENGTHENING:
1. Removal.
2. Don’t file the nail shape. Alternatively,
leave 2 mm of spare length, which
you will file down and remove after
leveling.
3. File the nail with a 220 grit file
without applying strong pressure,
lifting the nail plate flakes. Alternatively,
use a 100 grit buffer.
4. Manicure.
5. If you use removers, wash your hands
with soap and water after use.
6. Nail de-greasing. Perform two
passes. Use 4 wipes. One wipe per 5
fingers. The first pass - wipe the nail
surface. The second pass - take an
orange stick, put a wipe on it, and
wipe everything in the cuticle area and
sidewalls.
7. Dehydrator (optional).
8. Use primer as desired. However,
if the base for the undercoat has
sufficient acidity, primer is not
necessary.
9. Apply Rubber base LUNAmoon
underlay. It’s best to apply it with a
flat gel brush. The strokes should be
wiping. It’s important to emphasize all
the nail folds. Dry for 60 seconds.
10. Remove stickiness. Alignment. I
want to emphasize that when leveling
with gel, it’s necessary to create a
distance from the cuticle of 0.5-1 mm.
Cure in the lamp for 120 seconds.
Application Method: 11. Buff the form after leveling. This is
necessary to create thickness at the
edge to support the free edge.
12. It is necessary to file the natural nail
for better adhesion; if this is not done,
there will be lifting at the free edge of
the nail.
13. After filing, remove the tackiness.
14. Apply gel polish if needed.
15. Apply top coat and cure for 120
seconds. After curing, don’t wipe
anything off, as it may dull the shine.
CLASSIC NAIL EXTENSION:
1. Remove the previous set.
2. Trim the nail length to 1 mm and
shape into a round form.
3. Buff the nail gently with a 220-grit
file, lifting the cuticle area or use a 100-
grit buffer.
4. Perform a manicure.
5. If using removers, wash hands with
soap and water after use.
6. Dehydrate the nail. Use 4 wipes, one
per 5 fingers. The first pass is to wipe
the nail surface, and the second pass
is to take an orangewood stick, wrap it
with a wipe, and wipe the cuticle area
and sidewalls.
7. Apply dehydrator (optional).
8. Apply primer.
9. Apply a layer of Rubber Base
LUNAmoon. Best applied with a flat gel
brush. Brush strokes should be wiping.
It is important to cover all nail folds.
Cure for 30 seconds.
10. Remove the tackiness.
11. Apply nail form for extension of the
free edge.
12. Fill the nail form with clear gel for
artificial nail. Cure for 30 seconds.
13. File the free edge and shape as
needed.
14. Wipe off the tackiness and excess
dust.
15. Apply another layer of Rubber base
LUNAmoon to areas that were filed.
Cure for 30 seconds.
16. Smooth out with gel, place in the
lamp, and press for 10-15 seconds. If
the gel is very tacky or contains glitter,
press for 20 seconds.
17. Cure in the lamp for 120 seconds.
18. Before applying gel polish, wipe off
the tackiness.
19. Apply top coat and cure for 120
seconds. After curing, don’t wipe
anything off, as it may dull the shine.
You might also like
Visiems užsakymams, virš 50€, pristatymas nemokamas























