top of page
Diamond Gel nr11 15ml
Ціна

13,99€

BUILDER GEL is a

modeling gel used for nail

extension, restoration, and

strengthening.

• Acid-free

• Provides cushioning and does not

crack upon impact

• Medium consistency (not too runny

or too thick)

• Medium pigmentation, covers the

free edge

• Suitable for the «no-filing» technique

• Suitable for extension using «upper

forms»

• Doesn’t cause burning in the lamp

• Becomes thicker in cold

temperatures, thinner in warm

temperatures

 

• Thixotropic - becomes thinner during

application with brush movements

• Can be additionally heated to make

the gel thinner

• Hardens to a thickness of 1 mm; if the

thickness is less than 1 mm, it may

flex slightly, but this does not affect

wearability

• Doesn’t shrink and holds the arch

well

• Requires an underlay of Rubber base

LUNAmoon

Кількість

Залишилося всього 1

🚚 Pristatymo informacija

🔹 Pristatymas Lietuvoje:
Užsakymai išsiunčiami per 1–2 darbo dienas po apmokėjimo.
Pristatymas vykdomas per Omniva, DPD arba LP Express (paštomatai arba kurjeris).
Pristatymo terminas: 1–3 darbo dienos.

🔹 Pristatymo kaina:

  • Nuo 3.00 € (tiksli kaina apskaičiuojama užsakymo pateikimo metu)

  • Nemokamas pristatymas Lietuvoje, jei užsakymo suma viršija 50 €

🔹 Siuntos sekimas:
Po išsiuntimo gausite sekimo numerį, kad galėtumėte stebėti siuntos kelią.

💅Application method:

STRENGTHENING:

1. Removal.

2. Don’t file the nail shape. Alternatively,

leave 2 mm of spare length, which

you will file down and remove after

leveling.

3. File the nail with a 220 grit file

without applying strong pressure,

lifting the nail plate flakes. Alternatively,

use a 100 grit buffer.

4. Manicure.

5. If you use removers, wash your hands

with soap and water after use.

6. Nail de-greasing. Perform two

passes. Use 4 wipes. One wipe per 5

fingers. The first pass - wipe the nail

surface. The second pass - take an

orange stick, put a wipe on it, and

wipe everything in the cuticle area and

sidewalls.

7. Dehydrator (optional).

8. Use primer as desired. However,

if the base for the undercoat has

sufficient acidity, primer is not

necessary.

9. Apply Rubber base LUNAmoon

underlay. It’s best to apply it with a

flat gel brush. The strokes should be

wiping. It’s important to emphasize all

the nail folds. Dry for 60 seconds.

10. Remove stickiness. Alignment. I

want to emphasize that when leveling

with gel, it’s necessary to create a

distance from the cuticle of 0.5-1 mm.

Cure in the lamp for 120 seconds.

Application Method: 11. Buff the form after leveling. This is

necessary to create thickness at the

edge to support the free edge.

12. It is necessary to file the natural nail

for better adhesion; if this is not done,

there will be lifting at the free edge of

the nail.

13. After filing, remove the tackiness.

14. Apply gel polish if needed.

15. Apply top coat and cure for 120

seconds. After curing, don’t wipe

anything off, as it may dull the shine.

CLASSIC NAIL EXTENSION:

1. Remove the previous set.

2. Trim the nail length to 1 mm and

shape into a round form.

3. Buff the nail gently with a 220-grit

file, lifting the cuticle area or use a 100-

grit buffer.

4. Perform a manicure.

5. If using removers, wash hands with

soap and water after use.

6. Dehydrate the nail. Use 4 wipes, one

per 5 fingers. The first pass is to wipe

the nail surface, and the second pass

is to take an orangewood stick, wrap it

with a wipe, and wipe the cuticle area

and sidewalls.

7. Apply dehydrator (optional).

8. Apply primer.

9. Apply a layer of Rubber Base

LUNAmoon. Best applied with a flat gel

brush. Brush strokes should be wiping.

It is important to cover all nail folds.

Cure for 30 seconds.

 

10. Remove the tackiness.

11. Apply nail form for extension of the

free edge.

12. Fill the nail form with clear gel for

artificial nail. Cure for 30 seconds.

13. File the free edge and shape as

needed.

14. Wipe off the tackiness and excess

dust.

15. Apply another layer of Rubber base

LUNAmoon to areas that were filed.

Cure for 30 seconds.

16. Smooth out with gel, place in the

lamp, and press for 10-15 seconds. If

the gel is very tacky or contains glitter,

press for 20 seconds.

17. Cure in the lamp for 120 seconds.

18. Before applying gel polish, wipe off

the tackiness.

19. Apply top coat and cure for 120

seconds. After curing, don’t wipe

anything off, as it may dull the shine.

Поки що немає відгуківПоділіться думками. Залиште перший відгук.

Супутні товари

Для всіх замовлень понад 50€ — доставка безкоштовна.

bottom of page