Strong Base 13ml
12,99€
STRONG BASE — is a solid
base with gel-like properties.
• Makes nails hard and strong
• Self-leveling very quickly
• The consistency is medium-liquid,
which allows you to make an
alignment in a few seconds
• Weakly acidic 5-6 pH
• Hypoallergenic
• Can radiate heat and burn on
damaged and very thin nails. Doesn’t
burn on healthy nails
• Removes well with both sawing and
liquid
It’s important to provide a
substrate from an elastic
rubber base. It’s best to use the
Lunamoon Rubber base.
• If you remove the stickiness from this
base, then you can not cover it with a
top coat, it has a good gloss
• The basic rule of alignment – the
thickness on the end face should be
0.5 mm
• The power of the lamp for
polymerization is 36 - 48 W. And it
should be only the original lamp
Кількість
Залишилося всього 3
💅Application method:
1. Removal.
2. Don’t file the nail shape. Alternatively,
leave spare 2 mm in length, which will
be filed and removed after leveling.
Application method:
3. Use a 220 grit file to gently file the
nail from the top, lifting any nail plate
flakes. Alternatively, use a 100 grit
buffer.
4. Manicure.
5. If using removers, after their use, it
is necessary to wash hands with soap
and water.
6. Degydrate the nail. Two approaches
are needed. Use 4 wipes. One wipe
for 5 fingers. The first approach - wipe
the nail surface, the second approach
- take an orangewood stick, wrap it
with a wipe, and wipe everything in the
cuticle area and in the nail folds.
7. Primer is used at discretion. However,
if the base for the substrate has
sufficient acidity, then primer is not
needed.
8. Underlay with Rubber base
LUNAmoon. Best applied with a flat gel
brush. Strokes should be rubbing. It is
important to outline all nail recesses.
Cure for 60 seconds.
9. Remove stickiness.
10. Apply Strong base for leveling. Cure
in the lamp for 90 seconds.
11. Dust off the forms after leveling.
This is necessary so that a thickness
is formed at the end to hold the free
edge.
12. Since the nail was thin, it can curl,
so it is necessary to file down 1 mm
of natural nail from the middle. This
will prevent detachment. Because if
the material is hard and the nail is very
soft, the nail itself will begin to separate
from the hard material from the free
edge.
13. After filing, wipe off the stickiness
and cover with gel polish or
camouflage base in a thin layer.
14. Apply top coat. Cure for 120
seconds. Don’t wipe with anything after
curing, as it may lose its shine.
🚚 Pristatymo informacija
🔹 Pristatymas Lietuvoje:
Užsakymai išsiunčiami per 1–2 darbo dienas po apmokėjimo.
Pristatymas vykdomas per Omniva, DPD arba LP Express (paštomatai arba kurjeris).
Pristatymo terminas: 1–3 darbo dienos.
🔹 Pristatymo kaina:
-
Nuo 3.00 € (tiksli kaina apskaičiuojama užsakymo pateikimo metu)
-
Nemokamas pristatymas Lietuvoje, jei užsakymo suma viršija 50 €
🔹 Siuntos sekimas:
Po išsiuntimo gausite sekimo numerį, kad galėtumėte stebėti siuntos kelią.
Супутні товари
Для всіх замовлень понад 50€ — доставка безкоштовна.

















